Bordo SH-5 Burr 1/2" Flame Shaped 1/4" Shank Carbide Bur

$99.90

In Stock


Calculate Shipping



Free pick-up from store - $0.00
Click and collect from our Deception Bay, Brisbane store

  • 1/2" SH-5 Flame Shaped 1/4" Shank Burr
  • SH-5 Express cut tungsten carbide burr.
  • 6.35mm (1/4") Shank.
  • Express Cut Burrs (also referred to as Double Cut Burrs) are general purpose burrs designed for rapid stock removal and improved operator control.
  • Chip size is reduced and lower tool speeds can be used compared with standard cut burrs.
  • Ideal for use in carbon steel, cast iron, high strength steel, stainless steel, steel castings, steel welds, titanium alloy and fibreglass composite.
  • Harder materials require slower running speeds.
  • Smaller burrs require faster running speeds.
  • Long shank burrs require slower speeds for safety reasons.
  • Apply constant movement and light pressure when using the burr.
  • Running below the optimum speed will cause chipping.
  • Running above optimum speed will cause premature tooth wear.
  • Allowing the burr to become too hot may cause the braze to soften, and cause the head to become detached from the shank.
  • Using tools and collets which have become worn will cause chipping.
  • Do not sink the burr for more than one third of its periphery.

(6400-95225)

Part Number: 6400-95225
Brand: Bordo
Pack Qty: 1
Flute Length (inch): 1-1/4
Head Diameter (inch): 1/2
Overall Length (inch): 3
Shank (inch): 1/4
Style: SH-5
SKU 6400-95225
Brand Bordo
Shipping Weight 0.3000kg
Shipping Width 0.150m
Shipping Height 0.040m
Shipping Length 0.200m
Shipping Cubic 0.001200000m3

Be The First To Review This Product!

Help other Akinite users shop smarter by writing reviews for products you have purchased.

Write a product review


You May Also Like



Others Also Bought



More From This Category