Bordo SA-2 Burr 5/16" Cylindrical 1/4" Shank Carbide Bur
WAS $48.90
NOW $29.34
Sale Ends in
23:59 pm, 28 February 2026
- 5/16" SA-2 Cylindrical 1/4" Shank Burr
- SA-2 Express cut tungsten carbide burr.
- 6.35mm (1/4") Shank.
- Express Cut Burrs (also referred to as Double Cut Burrs) are general purpose burrs designed for rapid stock removal and improved operator control.
- Chip size is reduced and lower tool speeds can be used compared with standard cut burrs.
- Ideal for use in carbon steel, cast iron, high strength steel, stainless steel, steel castings, steel welds, titanium alloy and fibreglass composite.
- Harder materials require slower running speeds.
- Smaller burrs require faster running speeds.
- Long shank burrs require slower speeds for safety reasons.
- Apply constant movement and light pressure when using the burr.
- Running below the optimum speed will cause chipping.
- Running above optimum speed will cause premature tooth wear.
- Allowing the burr to become too hot may cause the braze to soften, and cause the head to become detached from the shank.
- Using tools and collets which have become worn will cause chipping.
- Do not sink the burr for more than one third of its periphery.
(6400-95006)
| Part Number: | 6400-95006 |
| Brand: | Bordo |
| Pack Qty: | 1 |
| Flute Length (inch): | 3/4 |
| Head Diameter (inch): | 5/16 |
| Overall Length (inch): | 2-1/2 |
| Shank (inch): | 1/4 |
| Style: | SA-2 |
| SKU | 6400-95006 |
| Shipping Weight | 0.2000kg |
| Shipping Width | 0.100m |
| Shipping Height | 0.030m |
| Shipping Length | 0.150m |
| Shipping Cubic | 0.000450000m3 |
Be The First To Review This Product!
Help other Akinite users shop smarter by writing reviews for products you have purchased.
