Abrasive Blasting Rust inhibitor 20 Litre

WAS $330.00
NOW $297.00
Sale Ends in
23:59 pm, 30 June 2024

Sold Out

Calculate Shipping

Flat Rate Shipping - $40.00
Australia Wide Shipping
Free pick-up from store - $0.00
Click and collect from our Deception Bay, Brisbane store

Concentrated salt removing, flash rust prevention and de-greasing aid.

Will remove all contaminates including salts, oil, and blast residue. Add to blast pot (wet blasting) and or use this product in conjunction with power/pressure washing for clean-up after blasting. Pressure washing after dry abrasive blasting, wet abrasive blasting or water jetting.


Flash rust prevention for approximately 48-72 hours. Often longer with no rain and temperatures above 5 degrees Celsius. After proper use surface salts such as chlorides, sulphates, nitrates, and all other salts are generally undetectable.  Immediately soluble in water or hydrocarbon solvents such as mineral spirits and xylene. No-hazardous, non-toxic and non-flammable. Biodegradable, colourless and odourless. Phosphate and Acid free. Evaporates with the water (dissolved in) Surface priming allowable immediately after evaporation.

For Wet Abrasive Blasting: Add AMS Flash Rust inhibitor to blast pot with water at a 200:1 dilution ratio. Also add to power/pressure washer water at 100:1 for final rinse off.

For Dry/Soda Abrasive Blasting: After dry blasting add AMS Flash Rust inhibitor to power/pressure washer at a ratio of 100:1 for cleaning off blast residue.


Store in a dry well-ventilated place at room temperature. Keep away from direct sunlight. Keep container tightly closed. Do not store at a temperature below -4 degrees Celsius or above 50 degrees Celsius. Will store for 3 years if storage advice is followed. Disposal – local council advice for disposal varies nationally, contact your local council for advice. Empty and cleaned packaging can be recycled. (Dispose of the lid)

Safety Information

Before using this product read the AMS Rust Inhibitor SDS (Safety Data Sheet) Keep out of reach of children.

Basic dilution ratio

200 litres of water to 1 litre of Abrasive Blasting Rust Inhibitor, variations are possible.


Hard water, industrial or plant water, well water, poor quality potable water can affect the performance. Do not use salt or brack water.


SKU 254419
Brand Akinite
Shipping Weight 22.0000kg
Shipping Width 0.300m
Shipping Height 0.400m
Shipping Length 0.300m
Shipping Cubic 0.036000000m3

Be The First To Review This Product!

Help other Akinite users shop smarter by writing reviews for products you have purchased.

Write a product review

You May Also Like

More From This Category